Contact a Banner Engineer
About Your Application

DX80 and Performance Models User Configuration Tool (UCT)

The User Configuration Tool allows a user to map the I/O between a DX80 or DX80 Performance Gateway and its Nodes. This tool requires Banner's USB to RS-485 adapter cable. Before installing the User Configuration Tool, read these instructions. Install the software before plugging a Gateway into your computer.

To install the latest version of the User Configuration Tool, click on one of the following software links to download the software and double-click the .MSI files to install.

For instructions how to determine if you are running a 32-bit or 64-bit version of Microsoft Windows, go to this Microsoft support page.

To find the most recent driver for your operating system, click here. To view videos that explain the User Configuration Tool and demonstrate some basic configuration procedures, refer to the "How To" Videos page.

 

MultiHop Configuration Tool (MHCT)

Configuration is made easy with the MultiHop Radio Configuration Tool, a software program similar to the User Configuration Tool used with the DX80 and DX80 Performance wireless products. Download either the 32-bit or 64-bit version and double-click the .MSI file to begin installing.

For instructions how to determine if you are running a 32-bit or 64-bit version of Microsoft Windows, go to this Microsoft support page.

  • MultiHop Radio Configuration Tool documentation: 150473

 

Sensor Configuration Tool

The Sensor Configuration Tool is designed use with several Sure Cross sensors, including temperature and humidity sensor models M12FTH3Q and M12FTH4Q, the vibration/temperature sensor, the GPS module, and the ultrasonic sensor.

For instructions how to determine if you are running a 32-bit or 64-bit version of Microsoft Windows, go to this Microsoft support page.

 

DXM Configuration Tool

Use the DXM Configuration Tool to configure your DXM Controller.

 

USB Adapter Cables

Use the RS-485 to USB adapter cable to connect your Gateway or MultiHop radio to your computer. To be used with the DX80...C models, these adapter cables requires cable model MQDMC-401.

RS485 to USB?Adapter Cable

The RS-485 to USB adapter cable connects the radio to a computer. Use model BWA-HW-006 for radios that transmite at 250 mW and below; use model BWA-UCT-900 for radios that transmite at 1 Watt. datasheet: 140377

The USB to 1-Wire adapter cable, model BWA-USB1WIRE-001, supplies power for one Sure Cross temperature-humidity 1-wire serial sensor model M12FTH4Q or any other 1-wire serial sensor. datasheet: 170020

 

Ethernet Data Radio

This software is for the Etherent Data Radio, model DXER9, not for the MultiHop Ethernet Data Radio.

To detect or change the IP address of your Ethernet Data Radio, use the IP Changer Utility. This utility allows you to change the IP address, network mask, and password of your Ethernet Data Radio. Once the IP address is configured, you can access the Web-based configuration pages from this utility.

Download the firmware files to update to Ethernet firmware version 1.60.4280 and radio firmware version 091. firmware

 

GatewayPro EDS File

EDS (Electronic Data Sheet) files allow users of networks employing Ethernet/IP protocol to very simply and easily add a Banner GatewayPro device. There is no need to configure the PLC manually to work with a GatewayPro - with just a few clicks the EDS file automatically configures the appropriate input/output assemblies to the module configuration, saving time and effort. There is even a Banner Performance GatewayPro graphic image included.

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.

06828 [change]

Find international distributors