U-GAGE T30UX: Analog

Overview

Compact, right-angle ultrasonic sensor with 0-10V dc or 4-20 mA analog outputs by model and built-in temperature compensation

  • Provides 10 to 30V dc supply voltage with 0-10V dc or 4-20 mA analog output, depending on model
  • Housed in T-style right-angle housing with 30 mm threaded nose
  • Available with range of 100 mm to 1 m with a selectable 45 ms or 105 ms response time, 200 mm to 2 m with a selectable 92 ms or 222 ms response time, or 300 mm to 3 m with a selectable 135 ms or 318 ms response time
  • Delivers high-accuracy performance with built-in temperature compensation across a wide range of ambient temperatures
  • Simplifies setup with push-button and remote TEACH-mode programming

Product Specifications

Sensing RangeModels ending in A:100 mm to 1 m (3.9 in. to 39 in.)
Models ending in B:200 mm to 2 m (7.8 in. to 78 in.)
Models ending in C:300 mm to 3 m (11.8 in. to 118 in.)
Ultrasonic FrequencyModels ending in A:224 kHz
Models ending in B:174 kHz
Models ending in C:114 kHz
Supply Voltage10 to 30V dc (10% max. ripple) at 40 mA, exclusive of load
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Output ConfigurationAnalog Output: 0 to 10V dc or 4 to 20 mA, depending on model
Output RatingAnalog Voltage Output:2.5 kΩ min. load resistance Minimum supply for a full 10V output is 12V dc (for supply voltages between 10 and 12, V out max. is at least V supply -2)
Analog Current Output:1 kΩ max. @ 24V input; max. load resistance = (Vcc-4)/0.02Ω
For current output (4-20 mA) models:ideal results are achieved when the total load resistance R = [(Vin – 4)/0.020]Ω. Example, at Vin = 24V dc, R ≈ 1 kΩ (1 watt)
Output Protection CircuitryProtected against short circuit conditions
Output Response TimeModels ending in A:45 ms (fast); 105 ms (slow)
Models ending in B:92 ms (fast); 222 ms (slow)
Models ending in C:135 ms (fast); 318 ms (slow)
Delay at Power-up500 ms
Temperature Effect0.02% of distance/ºC
Linearity0.25% of distance
ResolutionModels ending in A:0.1% of distance (0.5 mm min.)
Models ending in B:0.1% of distance (1.0 mm min.)
Models ending in C:0.1% of distance (1.5 mm min.)
Sensing HysteresisModels ending in A:2 mm
Models ending in B:3 mm
Models ending in C:4 mm
Minimum Window Size10 mm (0.4 in.)
AdjustmentsSensing window limits:TEACH-Mode configuration of near and far window limits may be set using the push button or remotely via TEACH input
Response speed selection:Fast or Slow
Advanced configuration options:Analog output slope, push button enabled/disabled, temperature compensation enabled/disabled
Loss of Signal Indication0 to 10V dc models:Analog output goes to 0V
4 to 20 mA models:Analog output goes to 3.6 mA
ConstructionHousing:PBT polyester
Push buttons:polyester
Transducer:epoxy /ceramic composite
Environmental ratingLeakproof design, rated IEC IP67 (NEMA 6)
Connections2 m (6.5 ft.) or 9 m (30 ft.) shielded 4-conductor (with drain) PVC cable, 150 mm (6 in.) PUR Euro-style pigtail (QPMA), or 4-pin integral Euro-style connector (Q8)
Operating ConditionsTemperature:−40 to 70º C (−40 to +158º F)
Max. Relative Humidity:95% at 50ºC non-condensing
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in., max acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine wave
Application NoteThe temperature warmup drift upon power-up is less than 1% of the sensing distance.
CertificationsCE Pending

English

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Analog Output 141958 Download

French

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Analog Output - French FD200 Download

German

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Analog Output - German GD200 Download

Italian

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Analog Output - Italian ID200 Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Built-to-Order Tower Lights

  • Preassembled, custom-configured
  • Three optional audible functions
  • Steady, flashing, or rotating LEDs
Configure your Tower Light »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.

06828 [change]

Find international distributors