U-GAGE T30UX: Discrete

Overview

Compact, right-angle ultrasonic sensor with configurable discrete outputs and built-in temperature compensation

  • Offers configurable discrete output allowing users to select normally open (NO) or normally closed (NC) and NPN or PNP output type
  • Housed in T-style right-angle housing with 30 mm threaded nose
  • Available with range of 100 mm to 1 m with a 45 millisecond response time, 200 mm to 2 m with a 92 millisecond response time, or 300 mm to 3 m with a 135 millisecond response time
  • Provides 10 to 30V dc supply voltage
  • Delivers high-accuracy performance with built-in temperature compensation across a wide range of ambient temperatures
  • Simplifies setup with push-button and remote TEACH-mode programming

Product Specifications

Sensing RangeModels ending in A:100 mm to 1 m (3.9 in. to 39 in.)
Models ending in B:200 mm to 2 m (7.8 in. to 78 in.)
Models ending in C:300 mm to 3 m (11.8 in. to 118 in.)
Ultrasonic FrequencyModels ending in A:224 kHz
Models ending in B:174 kHz
Models ending in C:114 kHz
Supply Voltage10 to 30V dc (10% max. ripple) at 40 mA, exclusive of load
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Output ConfigurationDiscrete (switched) output models: SPST solid-state switch. Configurable as NPN (sinking) or PNP (sourcing) via Mode push button. Normally Open (NO) or Normally Closed (NC) operation is also selectable via Mode push button. The default setting is PNP/NO.
Output RatingDiscrete output models:100 mA max.
OFF-state leakage current:NPN: < 200 μA @ 30V dc PNP: < 10 μA @ 30V dc
ON-state saturation voltage:NPN: < 1.6V @ 100 mA PNP: < 3V @ 100 mA
Output Protection CircuitryProtected against short circuit conditions
Output Response TimeModels ending in A:45 milliseconds
Models ending in B:92 milliseconds
Models ending in C:135 milliseconds
Delay at Power-up500 ms
Temperature Effect0.02% of distance/ºC
RepeatabilityModels ending in A:0.1% of distance (0.5 mm min.)
Models ending in B:0.1% of distance (1.0 mm min.)
Models ending in C:0.1% of distance (1.5 mm min.)
Sensing HysteresisModels ending in A:2 mm
Models ending in B:3 mm
Models ending in C:4 mm
Minimum Window Size10 mm (0.4 in.)
AdjustmentsSensing window limits:TEACH-Mode configuration of near and far window limits may be set using the push button or remotely via TEACH input
Output Configuration:NPN, PNP, Normally Open (NO), Normally Closed (NC) select
Advanced configuration options:Push button enabled/disabled, temperature compensation enabled/disabled
ConstructionHousing:PBT polyester
Push buttons:polyester
Transducer:epoxy /ceramic composite
Environmental ratingLeakproof design, rated IEC IP67 (NEMA 6)
Connections2 m (6.5 ft.) or 9 m (30 ft.) shielded 4-conductor (with drain) PVC cable, 150 mm (6 in.) PUR Euro-style pigtail (QPMA), or 4-pin integral Euro-style connector (Q8)
Operating ConditionsTemperature:−40 to 70º C (−40 to +158º F)
Max. Relative Humidity:95% at 50ºC non-condensing
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in., max acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine wave
Application NoteThe temperature warmup drift upon power-up is less than 1% of the sensing distance.
CertificationsCE Pending

English

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Discrete Output 138381 Download

Product Brochures

Document Name Part Number File Size Download
1. U-GAGE T30UX Ultrasonic Sensors Flyer 142814 Download

French

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Discrete Output - French FD201 Download

German

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Discrete Output GD201 Download

Italian

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE T30UX Series with Discrete Output - Italian ID201 Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Looking for CAD Files?

Browse by model family or type in your model number to find STEP, IGS, DXF, or PDF files for your project.

Find them now »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.

06828 [change]

Find international distributors