U-GAGE Q45UR Series—Analog

Overview

  • Uses one of three remote sensing heads for precision sensing in hard-to-access or difficult applications
  • Offers 15 to 24V dc supply voltage with selectable 4-20 mA or 0-10V dc analog output
  • Automatically scales analog output over the width of the programmed sensing window
  • Provides sensing range of 50 to 250 mm
  • Offers selectable positive or negative slope
  • Features programmable response speed of 10 or 320 milliseconds, with a potentiometer
  • Offers 0.1 mm resolution
  • Simplifies setup with push-button TEACH programming of near/far limits of the sensing window
  • Includes built-in temperature compensation on remote sensing head and an operating temperature range of -25° to 70° C
  • Provides digital filtering for exceptional electrical and noise immunity

Product Specifications

Supply Voltage and Current15 to 24V dc (10% max. ripple) @ 100 mA (exclusive of load)
Range50 to 250 mm
Ultrasonic Frequency400 kHz
Supply Protection CircuitryProtected against reverse polarity and transient voltages
Output ConfigurationVoltage sourcing (0-10V dc) or current sourcing (4-20 mA) selectable using programming switch #2
Output RatingVoltage sourcing:0-10V dc, 10 mA max.
Current sourcing:4-20 mA, 1 to 500 ohm impedance
Output Protection CircuitryProtected against continuous overload or short-circuit of outputs
Output Response Time10 to 320 milliseconds (2 to 64 cycles) selectable
ResolutionSpecified using a 50 x 50 mm aluminum plate at 22º C under fixed sensing conditions using the 4-20 mA output @ 15V dc. 320 milliseconds response:0.2% of sensing distance
10 milliseconds response:0.4% of sensing distance
Linearity1% of full scale, specified using a 50 x 50 mm aluminum plate at 22º C under fixed sensing conditions using the 4-20 mA output @ 15V dc.
Temperature Stability±0.03% of the window limit positions per ° C from 0° to 50° C (±0.05% per ° C over remainder of operating temperature range)
Sensing Window Width5 to 200 mm, when independent near and far limits are taught; 1, 2, 3 or 4 mm (switch selectable), when a sensing distance setpoint is taught
Ultrasonic Beam Angle±3.5°
AdjustmentsPush-button TEACH-mode programming of window limits. The following may be selected by a 4-position DIP switch located on top of the controller, beneath a transparent O-ring sealed acrylic cover and beneath the black inner cover Switch 1:Output slope: output value increases or decreases with distance
Switch 2:Output mode: current output or voltage output
Switch 3 & 4:response to loss of echo
Response speed adjustment:single-turn potentiometer selects six response values from 10 to 320 milliseconds
Indicators5-segment moving dot LED indicates the position of the target within the sensing window 3 LED indicators:Green, Yellow and Red
Green ON steady:power to controller is ON
Green flashing:current output fault detected (indicates that the 4-20mA current path to ground has been opened)
Yellow ON steady:outputs are conducting (yellow also indicates programming status during setup)
Red flashing:indicates relative signal strength of received echo
ConstructionController:Molded thermoplastic polyester housing, o-ring sealed transparent acrylic top cover, and stainless-steel hardware.
Sensors:
M18C2.0:stainless-steel M18 threaded barrel housing and jam nuts, polyetherimide front cover, ceramic transducer, polyurethane rear cover
S18C2.0:thermoplastic polyester S18 threaded barrel housing and jam nuts, polyetherimide front cover, ceramic transducer, polyurethane rear cover
Q13C2.0:molded 30% glass reinforced thermoplastic polyester housing, ceramic transducer, fully epoxy-encapsulated
Environmental RatingController:IEC IP67; NEMA 6P
Sensors:IEC IP65; NEMA 4
ConnectionsController:5-conductor 2 m or 9 m shielded PVC-jacketed attached cable, or 5-pin Euro- or Mini-style quick-disconnect fitting. QD cables are ordered separately.
Sensors:2 m PVC-jacketed attached cable terminated with 4-pin Euro-style quick-disconnect fitting for connection to controller.
Operating ConditionsTemperature:-25° to +70° C
Relative humidity:85% (non-condensing)
Vibration and Mechanical ShockAll models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60 Hz max. double amplitude 0.06”, maximum acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation). Also meets IEC 947-5-2 requirements: 30G, 11 milliseconds duration, half-sine wave.
Application Notes• The controller has non-volatile memory which remembers the last sensing distance setpoint setting if power is removed and later reapplied.

• The sensing distance setpoint may be programmed using the Remote TEACH input (see hookup diagrams).

• Acceptable target angle is within ±5° of normal for a smooth, flat target; target rotation does affect the apparent target location with respect to the sensor.

English

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs 59321 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output 59323 Download

Product Brochures

Document Name Part Number File Size Download
1. Ultrasonic Solutions Flyer 142025 Download

Dutch

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs -- Datasheet
(Dutch)
DD049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output -- Datasheet
(Dutch)
DD048 Download

French

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs -- Datasheet
(French)
FD049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output -- Datasheet
(French)
FD048 Download

German

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Output -- Datasheet
(German)
GD049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output -- Datasheet
(German)
GD048 Download

Italian

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs -- Datasheet
(Italian)
ID049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output -- Datasheet
(Italian)
ID048 Download

Japanese

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - Japanese J20001M Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Outputs - Japanese J20002M Download

Portuguese

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Output - Portuguese PD049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - Portuguese PD048 Download

Spanish

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Outputs - Spanish SD049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Outputs - Spanish SD048 Download

United Kingdom

Data Sheets

Document Name Part Number File Size Download
1. U-GAGE Q45UR Remote Ultrasonic Series, Discrete Output - UK English ED049 Download
2. U-GAGE Q45UR Remote Ultrasonic Series, Analog Output - UK English ED048 Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Banner Enhances Mobile Site

m.bannerengineering.com »
  • Search by part/model number
  • Easily locate distributors in your area
  • Share data from your phone or tablet

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.

77072 [change]

Find international distributors