D10 Expert with Numeric Display—Analog & Discrete


High-performance, low-contrast plastic fiber optic sensor with numeric display

  • 12 to 24V dc or 15 to 24V dc supply voltage with either an NPN or PNP discrete output, and a 4-20 mA current analog output or 0-10V dc voltage analog output, depending on model
  • Digital display of signal strength and operating status
  • Push-button for easy-to-set static, dynamic or single-point programming
  • Manual adjustment for fine tuning
  • Light- or dark-operate selectable
  • Four-mode power and speed selection with automatic crosstalk avoidance circuitry
  • Response time as fast as 50 microseconds
  • Visible red or green sensing beam

Product Specifications

Supply Voltage and Current4-20 mA analog models:12 to 24V dc (10% max. ripple) @ less than 65 mA (exclusive of load)
0-10V dc analog models:15 to 24V dc (10% max. ripple) @ less than 70 mA (exclusive of load)
RangeVaries by sensing mode and fiber optics used
Supply Protection CircuitryProtected against reverse polarity and transient voltage
Output ConfigurationTwo independently configurable outputs, depending on model: NPN (current sinking) with analog output (4-20 mA or 0-10V) or PNP (current sourcing) with analog output (4-20 mA or 0-10V)
Output RatingDiscrete output:150 mA max. load
OFF-state leakage current:less than 10 µA @ 24V dc
ON-state saturation leakage (NPN):less than 1.5V @ 150 mA load
ON-state saturation leakage (PNP):less than 2.5V @ 150 mA load
Analog output:4-20 mA or 0-10V dc
Load (4-20 mA models):100 ohms max. impedance
Load (10-30V dc models):1 M ohms min. impedance
Output Protection CircuitryProtected against false pulse on power-up and continuous short-circuit
Output Response TimeDiscrete output:Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds
Analog output:1 millisecond
Delay at Power-up1 second; outputs do not conduct during this time.
AdjustmentsTwo push buttons or remote programming of (TEACH) switching threshold response time, OFF-delay, light operate (LO)/dark operate (DO) and display
IndicatorsFour-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light operate (LO)/dark operate (DO) selection; two yellow LEDs serve as output indicators and active channel indicator.
ConstructionBlack ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover.
Environmental RatingNEMA 1; IEC IP50
ConnectionsPVC-jacketed 2 m or 9 m 6-wire attached cable or integral 6-pin Pico-style QD. QD cables are ordered separately.
Operating ConditionsTemperature:-20° to +55° C
Storage Temperature:-20° to +80° C
Relative humidity:90% @ 50° C
Ambient Temperature Rating:
3 stacked devices:55° C @ 150 mA load
7 stacked devices:50° C @ 50 mA load
10 stacked devices:45° C @ 50 mA load
Installation35 mm DIN rail or included mounting bracket


Data Sheets

Document Name Part Number File Size Download
1. D10 Expert Series with Numeric Display, Analog -- Datasheet 65448 Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Built-to-Order Tower Lights

  • Preassembled, custom-configured
  • Three optional audible functions
  • Steady, flashing, or rotating LEDs
Configure your Tower Light »

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.

77072 [change]

Find international distributors