|Supply Voltage and Current||24V ac/dc, ±10%; 50/60 Hz
Power Consumption:approx. 0.75 VA / 2 W
|Supply Protection Circuitry||Protected against transient voltages and reverse polarity
|Output Configuration||Output (K1 & K2):three redundant (total of six) safety relay (forced-guided) contacts—AgSn02, plus one normally-closed auxiliary monitor output
Max. voltage:250V ac/dc
Max. current:6 A ac/dc
Min. current:30 mA @ 10V dc
Max. power:150 W (1500 VA)
Mechanical life:10,000,000 operations
Electrical life:100,000 at full resistive load
Note:Transient suppression is recommended when switching inductive loads. Install suppressors across load. Never install suppressors across output contacts.
|Output Response Time||35 milliseconds typical
|Input Requirements||Input switch must have a normally-closed contact capable of switching 40 to 100 mA @ 13 to 27V ac/dc.
Reset switch must have one normally-open contact capable of switching 20 to 30 mA @ 13 to 27V ac/dc.
|Status Indicators||3 Green LED indicators :
Power:power is supplied to safety module
Channel 1:K1 energized
Channel 2:K2 energized
|Environmental Rating||Rated IEC IP40; NEMA 1
|Mounting||Mounts to standard 35 mm DIN-rail track. Safety module must be installed inside an enclosure rated NEMA 3 (IEC IP54), or better.
|Vibration Resistance||10 to 55 Hz @ 0.35 mm displacement per IEC 68-2-6
|Operating Conditions||Temperature:0° to +50° C
Relative humidity:90% @ +50° C (non-condensing)