WLB92 Industrial LED Light Bar

Overview

The WLB92 is an ultra-bright LED fixture with an even light output and very bright light for increased productivity.

  • Increase worker productivity and ergonomics with bright, high-quality, uniform light
  • Durable light stands up in your environment with a rugged metal housing and shatterproof light cover
  • No maintenance time or cost with long-life, energy-efficient LEDs
  • Flexibility to place light where needed with ac and dc models
  • Easy installation with variety of mounting options: surface, swivel, snap and hanging brackets
  • AC models are DLC qualified and have a five year warranty

Product Specifications

Supply Protection CircuitryAC Models: Protected against transient voltages







DC Models: Protected against reverse polarity and transient voltages
Supply VoltageAC Models: Operating Voltage: 120 V ac, 60 Hz in North America



Operating Voltage: 100 to 277 V ac, 50/60 Hz outside North America



Power factor: > 0.95 at 120 V ac and > 0.90 at 230 V ac



Total harmonic distortion (THD): < 20%







DC Models: Operating Voltage: 24 V dc (± 10%) Use only with a suitable Class 2 power supply. (North America) Use only with a suitable Class III SELV power supply. (Europe)
LED LifetimeLumen Maintenance - L70



When operating within specifications, output will decrease less than 30% after 50,000 hours.
Light CharacteristicsAC Models: Color: Daylight White



Color Temperature (CCT): 5000K (± 300K



Lumen Output: 550 mm - 3130 lumens, 1100 mm - 6500 lumens



Luminous Efficacy: 92 lumens/watt typical at 120 V ac at 25 °C (77 °F)



CRI: 82, typical







DC Models: Color: Daylight White Color Temperature (CCT): 5000K (± 300K) Lumen Output: 550 mm - 3130 lumens, 1100 mm - 6500 lumens Luminous Efficacy: 92 lumens/watt typical at 24 V dc at 25 °C (77 °F) CRI: 82, typical
Test DataLM-79, LM-80, TM-21
Switch/Dimming KnobAC Quick Disconnect: On/Off switch and dimming knob, dimmable to 10% intensity







AC Conduit: Compatible with 0-10 V analog LED dimming, dimmable to 10% intensity

DC (some models): On/Off switch and dimming knob, dimmable to 0% intensity
Pulse Width Modulation (PWM) Dimming (some DC models) Frequency: Up to 1000 Hz



Voltage: 12 to 24 V dc



Current: 4 mA maximum



Compatible with the LC65 Dimmer Module. For more information, refer to the LC65 LED Dimmer Module datasheet, p/n 177086.
ConstructionAnodized aluminum housing, polycarbonate window and end caps, and stainless steel mounting brackets
Spacing CriterionVertical: 1.20



Horizontal: 1.32
MountingAC Quick Disconnect Models: Snap mount brackets included (two for the 550 mm model; three for the 1100 mm model) Compatible with integral 45 mm aluminum framing mounting slot







AC Conduit Models: Surface mount brackets included (2)
Compatible with integral 45 mm aluminum framing mounting slots Several optional mounting brackets available

DC Models: Surface mount brackets included (2)
Compatible with integral 45 mm aluminum framing mounting slots Several optional mounting brackets available
ConnectionsAC Quick Disconnect Models: Integral custom quick disconnect (connecting cordset required)







AC Conduit Models: 1/2-inch trade size conduit knockout

DC Models: Integral 4-pin M12/Euro-style quick disconnect connector (4-pin connecting cordset required for QD models); or 2 m (6.5 ft) integral cable
Environmental RatingIEC IP50
Operating TemperatureAC Quick Disconnect Models: 550 Lighted Length: –35 °C to +50 °C (–31 °F to +122 °F) for 24 hours per day for 5 years of operation 1100 Lighted Length: −40 °C to +45 °C (−40 °F to +113 °F) for 16 hours per day for 5 years of operation; or −40 °C to +35 °C (−40 °F to +95 °F) for 24 hours per day for 5 years of operation







AC Conduit Models: 550 mm Lighted Length: Models Surface Mount Installation: –35 °C to +50 °C (–31 °F to +122 °F) for 24 hours per day for 5 years of operation Hanging Installation (> 0.5 m from ceiling): –35 °C to +50 °C (–31 °F to +122 °F) for 24 hours per day for 5 years of operation
1100 mm Lighted Length: Models Surface Mount Installation: −40 °C to +45 °C (−40 °F to +113 °F) for 16 hours per day for 5 years of operation; or −40 °C to +35 °C (−40 °F to +95 °F) for 24 hours per day for 5 years of operation Hanging Installation (> 0.5 m from ceiling): −40 °C to +50 °C (−40 °F to +122 °F) for 16 hours per day for 5 years of operation; or −40 °C to +45 °C (−40 °F to +113 °F) for 24 hours per day for 5 years of operation

DC Models: −40 °C to +70 °C (−40 °F to +158 °F) 550 Lighted Length Models: Light output begins to decrease above 65 °C (149 °F); light output is approximately 90% of maximum intensity at 70 °C (158 °F). 1100 Lighted Length Models: Light output begins to decrease above 45 °C (113 °F); light output is approximately 75% of maximum intensity at 60 °C (140 °F) and 65% of maximum intensity at 70 °C (158 °F).
Storage Temperature−40 °C to +70 °C (−40 °F to +158 °F)
Vibration and Mechanical ShockVibration 10 to 55 Hz 0.5 mm p-p amplitude per IEC60068-2-6



Shock 5G 11 ms duration, half sine wave per IEC60068-2-27
Application NotesAC Quick Disconnect Models: When connecting continuous run/cascadable lights in series, see table for maximum number of units. Do not exceed a maximum wiring distance of 100 m (328 ft) in the main power cable and any cascading cables.







AC Conduit Models: When connecting continuous run/cascadable lights in series, it is important not to exceed maximum current limitations of 14 AWG, 75 °C wire.
CertificationsUL listed and DLC qualified

English

Data Sheets

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar
(AC Quick Disconnect) -- Datasheet
183984 Download
2. WLB92 Industrial LED Light Bar
(AC Conduit) -- Datasheet
183985 Download
3. WLB92 Hanging Bracket Kit -- Datasheet 183866 Download
4. WLB92 Industrial LED Light Bar
(DC) -- Datasheet
183983 Download

Product Brochures

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar Sell Sheet 185183 Download
2. Workstation Illumination Flyer F206 Download

French

Product Brochures

Document Name Part Number File Size Download
1. Workstation Illumination Flyer FR-F206 Download
2. WLB92 Industrial LED Light Bar Sell Sheet FR-185183 Download

German

Product Brochures

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar Sell Sheet DE-185183 Download

Italian

Product Brochures

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar Sell Sheet IT-185183 Download

Polish

Product Brochures

Document Name Part Number File Size Download
1. Lighting Solutions Brochure PL-F188 Download

Portuguese

Product Brochures

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar Sell Sheet - Portuguese
(BR)
PT-BR-185183 Download

Spanish

Data Sheets

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar
(AC Quick Disconnect) -- Datasheet
(Spanish)
183984_ES-MX Download
2. WLB92 Industrial LED Light Bar
(AC Conduit) -- Datasheet
(Spanish)
183985_ES-MX Download
3. WLB92 Hanging Bracket Kit
(Spanish)
183866_ES-MX Download
4. WLB92 Industrial LED Light Bar
(DC) -- Datasheet
(Spanish)
183983_ES-MX Download

Product Brochures

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar Sell Sheet - Spanish
(MX)
ES-MX-185183 Download

Turkish

Product Brochures

Document Name Part Number File Size Download
1. WLB92 Industrial LED Light Bar Sell Sheet TR-185183 Download

Banner Insider eNewsletter

Helpful application information, new product updates, answers to frequently asked questions, and more.

Subscribe Now »

Banner Enhances Mobile Site

m.bannerengineering.com »
  • Search by part/model number
  • Easily locate distributors in your area
  • Share data from your phone or tablet

Worldwide Distributors

Banner has more than 3,000 distributors—ready to help you. Enter your U.S. city or zip.

02139 [change]

Find international distributors